> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:time-nuts- > [EMAIL PROTECTED] On Behalf Of Ronald Held > Sent: Friday, December 14, 2007 5:35 PM > To: [email protected] > Subject: [time-nuts] Upgrading possibilities for more > accurate,precise stable mark ii > > Greetings: > I do not know how to properly add to a thread, so I am > resubmitting > this I do not have the necessary circuit skills, so i would have to > buy preassembled components. I have a > Endrun Precis Cf OCXO discipline via CDMA signals, which go into a > display > unit driven by a STAMP microprocessor(AFAIK, since Bob build and > programmed it. > Given that I cannot receive GPS signals in my apartment, what are > my options? > Is it to go to a Rb/Cs standard and counter? if that is so how do I > periodically sync up with a more accurate time source? > Ronald > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi- > bin/mailman/listinfo/time-nuts > and follow the instructions there.
What are you trying to accomplish? The Praecis Cf has 10MHz out as well as ASCII time on rs232 according to specs. So you could take the RS-232 time data into a PC if this is what you're trying to do. If you want to do more you could build something similar to the Soekris net4501 that John has on his page http://www.febo.com/pages/soekris/ This is actually what I'm in the middle of building and how I found out about this list. Lots of info on this project on PHK's pages and others. Mike _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
