Stuart wrote: > Has anyone measured the 10Mhz output level of these units. How about the > output impedance? > Has anyone tried to tap off the 10Mhz from the OCXO on the XO unit? if so > what output level > did you get. I am looking for a GPSDO with an output level of at least 0dbm > into 50 ohms. > > Stuart > The XO unit is different from the one in your message title (RB has an LPRO rubidium inside). I don't have an XO unit but I think it is the one that has a GPS receiver inside. I don't think I ever heard of anyone getting either the RFG or RFTG to work in their original configurations, (interconnected with the other units.)
I think the output they make is 15 MHz derived from the internal 10 MHz. Maybe some of them have 10 MHz output too. There was lots of discussion about these a while back. You might try going here: http://www.mail-archive.com/[email protected]/info.html and do some searches. (Say RFG, RFTG and maybe LPRO if you have the RB.) For my RFG-RB unit, I decided that most of the internals weren't that helpful but the LPRO rubidium could be used with some other circuitry driving it. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
