Hi everybody, I mentioned some time ago that I had an Ru 10MHz source and I would like to calibrate it. I have an hp 5335 counter and a Jupiter GPS with 10kHz output. I was wondering if I could use the Ru 10MHz as and external clock for the 5335 and then measure the frequency of the 10kHz gps locked signal and adjust the Ru to read exactly 10kHz? If I let the 5335 average the frequency input it will display 12 digits - how many of those are reliable I'm not sure but it seems that this may be an easy way for me to check the Ru. Is this a viable method or am I missing something - I haven't done a lot of research into the time keeping world yet. Also, the model Ru I have is the Efratrom frk-h with external frequency control. I have had a quick read of the manual but can't find any information on how this works. I was thinking this might enable me to discipline the Ru to GPS - does anyone know how this works?
Thanks for your help Happy holidays Tim _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.