Randy Warner wrote: > > Morris, > > The easiest thing is to connect a jumper from Pin 1 of the 10-pin header > to > one of the holes used to previously mount the battery. I would suggest > putting a resistor (1-4.7K is fine) and diode in the middle of this wire > to > limit current in case of any mistakes and prevent any possibility of the > onboard charger from damaging your external battery. A couple of standard > alkaline AAA cells will keep the VP backed up for MANY years.
Randy, Thanks very much for this info. It confirms what I thought but it's nice to hear it from an expert! Happy New Year, Morris _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
