Hello group, This request is primarily directed to Said concerning the Fury OEM board that several of us bought a few months back. I have been working with the board and trying several different OCXOs. Is there a table or graph that would help determine the SERVO:DATG index if the Hz/volt slope of the oscillator is known. The simple table in the Users Manual (rev. 1.4) that lists four different data points is a start but it is very difficult to interpolate intermediate points. Additionally, the Max Frequency Deviation for the oscillator is a bit ambiguous since some are based on -5v to +5V (10811) and others just 0v to +5 (MTI). The table lists an index of 250.0 for the 10811 @ 2Hz (-5v to +5v) but Paragraph 4.7.1.2 states 150 for a +-2v EFC. Several index points referenced to Hz/volt would help save a lot of experimentation.
Regards... Don J. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
