The oscillator really runs at 10 MHz and is multiplied to 15 (I think via a divide by 3, then multiply by 2). You should be able to bypass the divider/multiplier circuit and route the original 10 MHz to the output. However, I think there is an alarm circuit that looks for the presence of RF; you need to make sure that isn't bypassed as well.
John ---- Bo Granlund said the following on 04/13/2008 04:08 PM: > Hi everybody, > > Sorry for asking this kind of stupid question, but I've tried to do my best > with google and it hasn't revealed a lot of decisive results. > > The thing is, I have a Lucent RFTG-m-XO that outputs 1PPS and 15MHz signal. > I was wondering, how do you go ahead and convert the 15MHz output to a > 10MHz output? What kind of equipment do I need in between there to make > this happen? > > I'm really sorry, because I do realize this is a really stupid question, but > I'm kindof out of ideas, and I'm more of a software guy than an electronics > guy. :) > > Oh, there is a 10MHz input to the RFTG-m-XO. What is the purpose of this > input? > > kind regards, > Bo Granlund > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
