Hi CH, good to know; it seems my unit is doing fairly well with the raw 1PPS from the M12+. Maybe that GPS is "good enough" for the loop filter. I don't see a difference in my short term measurements with or w/o 1PPS input. BTW: the PRS10 should have a threshold where the counters just get reset. Otherwise how would the unit originally drift if the 1PPS is say 500ms off? The Fury 1PPS output can be set to a large offset from UTC, one of these days I will set it to say 200ms and see how the PRS10 handles such a massive phase offset from one pulse to the next... bye, Said In a message dated 4/24/2008 20:36:55 Pacific Daylight Time, [EMAIL PROTECTED] writes:
Incidentally, it is my experience that the PRS10 behaves fairly poorly if you simply feed it 1PPS without sawtooth correction. I'm in the midst of a move so I can't relate numbers at the moment. **************Need a new ride? Check out the largest site for U.S. used car listings at AOL Autos. (http://autos.aol.com/used?NCID=aolcmp00300000002851) _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
