Hi, and thanks for your replies PHK and Bruce, On 4/25/08, Poul-Henning Kamp <[EMAIL PROTECTED]> wrote: > > In message <[EMAIL PROTECTED]>, > "=?ISO-8859-1?Q?Pekka_Niemel=E4?=" writ > es: > > > It works fine with NTPns, but you must make sure you use a RS422 card which > has an extra input so you can get the PPS signal also. > > I used a Quatech card and that worked well.
Yes, I'm looking for a Quatech card from a Finnish dealer. So, I need the 2 serial port version of the card to get everything I need? I'm not sure how and what should be fed to the rs-422 connector, can't I use a rs-232c from the computer run through a max232? Sorry for asking these stupid questions, but I'm kindof out of luck. Synergy says they have something called Deutsch connectors from the antenna and receiver. I'm not familiar with this kind of connector. Synergy says there is a rs-422 connector, do they provide something like a adapter which will turn the Deutsch thing into a RS-422 connector and separate wires for 1PPS and apparently a second power source? I'm thrilled that NTPns will work with this setup. :) warm regards, P. Niemelä -- > Poul-Henning Kamp | UNIX since Zilog Zeus 3.20 > [EMAIL PROTECTED] | TCP/IP since RFC 956 > FreeBSD committer | BSD since 4.3-tahoe > Never attribute to malice what can adequately be explained by incompetence. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
