Hi Patrick: Many decades ago I used a Barnes Engineering spot IR sensor. It's cost tens of thousands of dollars and had a microscope for alignment. The problem then and now is that you need to know the IR emissivity of the thing you're looking at in order to get temperatures. If you try to read a mirror and are seeing a clear blue sky reflection in the mirror, even though the mirror is at room temperature you will read some large negative temperature like - 60 deg C.
A way around that is to coat everything with a black paint that's also black for IR, but that's messy. A simpler way is to get a temperature probe for your DMM and just touch parts. For a crude look use a digital camera that has the IR blocking filter removed and you can see near IR. For example a car driving away viewed in near IR shows red for LED lights and bright white for filament lights. Another problem with low cost IR temperature sensors is that the beam angle is around 90 degrees. Have Fun, Brooke Clarke http://www.prc68.com/P/Prod.html Products I make and sell http://www.prc68.com/Alpha.shtml All my web pages listed based on html name http://www.PRC68.com http://www.precisionclock.com http://www.prc68.com/I/WebCam2.shtml 24/7 Sky-Weather-Astronomy Web Cam Patrick wrote: > Hey Everybody > > I tried to use a cheap IR thermometer to do some quick, pre-circuit > analysis tests, a couple of years ago on a particular job. > > It went bad, the laser did not even line up with the area being > measured, I missed a burning hot capacitor and wasted a lot of time. > > I was thinking about buying a better one this time. Does anyone have any > suggestions? Do you think they are useless for PCB tests? Caps should > not be hot and power resistors and transistors should not be cold right? > but the spot size to laser ratio on most of these are not good, are they > still useful? > > I had a hell of a time trying to read my Son's temperature last night > when he had a fever, anyone tried one of these out on their children? > > Thanks in advance-Patrick > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
