Quoth John Miles at 2008-06-03 11:56... >> Quoth Bruce Griffiths at 2008-06-03 09:50... >> >> > How do you cope with SMT parts (eg high frequency ADCs) with metal >> > thermal transfer /ground connections under the package itself? >> >> Haven't done it myself, but interested to hear others experiences. I'm >> guessing that this would be a job for solder paste and a toaster oven - >> or high-tech equivalent. > > Yes, see the link I posted. Solder paste + heat gun does the trick, or you > can just carve out a hole for your soldering iron tip with a Dremel tool.
Yes - thanks for that, it was interesting reading. Think I might post that link over on the Homebrew PCB list, as I know that the question has been asked there fairly recently. Cheers M -- Matthew Smith Smiffytech - Technology Consulting & Web Application Development Business: http://www.smiffytech.com/ Personal: http://www.smiffysplace.com/ LinkedIn: http://www.linkedin.com/in/smiffy _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
