> I was wondering if someone could shed some light on how the tboltmon can be > able to log the measuements form a 53132 and what the setup there could be. > I don't have a 53132 but the CNT-90 has a 53132 compatibility mode... but it > does not grey out the controls for that. How do I get that cooking?
Set a second serial port for the counter. Use the 53131/53132 to measure your UUT (1PPS) vs. the TBolt (1PPS). TBoltMon then does sawtooth correction and logs the result. Rick's CNS TAC32 program does a similar thing. I think the 53132A is simply set to talk only mode (does the CNT-90 do that too?) I'm not near my lab now, or else I'd be more specific. > Trimble's site seems not to provide all the info any more. If someone has the > appnotes etc. I would apprechiate that. Basically any info beyond the manual > and tboltmon which had alternative links from tom's page. I figured that over the next few months the group will come up with all sorts of additional information on our own. /tvb _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
