I have long had a Thunderbolt with the power connector on the rear and found a Trimble web page for it.
However, the unit I acquired through the time-nuts buy has the power connector on top and it's a different connector. Is there a web page detailing that Thunderbolt configuration? Thanks. Steve Magnus Danielson wrote: > Hi fellow time-nuts! > > I received my Thunderbolts Monday, but I was delayed until this evening (no > worries, time-nuts related delay) to crimp the power and hook it up. > The wrong wire was bent away, but since the colours did not match the webpage > I > got curious. Once that was cleared up it was a simple task to get things > together. Really a great kit! > > It fired up nicely. Came up on COM2 rather than COM1, but I can live with > that. > > I was wondering if someone could shed some light on how the tboltmon can be > able to log the measuements form a 53132 and what the setup there could be. > I don't have a 53132 but the CNT-90 has a 53132 compatibility mode... but it > does not grey out the controls for that. How do I get that cooking? > > Trimble's site seems not to provide all the info any more. If someone has the > appnotes etc. I would apprechiate that. Basically any info beyond the manual > and tboltmon which had alternative links from tom's page. > > Cheers, > Magnus > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > -- Read The Patriot It's Right -- It's Free http://PatriotPost.US/subscribe/ Veritas vos Liberabit _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
