I might try that too . . . except that the Thunderbolt has a MiniCircuits ZFSC-2-1 splitter mounted on top, just above the DB9. The splitter appears to be bolted from inside of the Thunderbolt, so the Thunderbolt will have to be disassembled to remove the splitter.
Anyone taken a Thunderbolt apart? At first examination, it appears that six screws should allow the two pieces of the enclosure to separate. Any pitfalls or gotchas? Advice? Thanks. Steve K8JQ Didier Juges wrote: > Here is how I *glued* the AllElectronics power supply to the top of the > Thunderbolt and shortened the cable for a neat, compact package. I connected > the chassis wire of the power supply to the TB case. > > http://www.ko4bb.com/Test_Equipment/Thunderbolt/group_buy/ > > The power supply is the exact same length as the TB, just the strain relief > for the DC Out cable sticks out a lot, so I cut it and removed the cable > jacket. > > Didier KO4BB > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > -- Read The Patriot It's Right -- It's Free http://PatriotPost.US/subscribe/ Veritas vos Liberabit _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
