> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Thomas A. Frank > Sent: Friday, June 13, 2008 10:18 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Non-impedance matched antenna cables > > > I've another antenna, but is a cheap one with magnetic > base, only used > > for a nixie clock :) > > > I have one of those as well, a Trimble 28367-40 from eBay, it > is feeding my Thunderbolt (thank you TVB!), and it works fine > just sitting on the window sill - inside! > > I am curious, however...how does one get TboltMon to SAVE the > surveyed position? It had the proper value in a few hours, > and by the next day all the little software lights were > one...but the program doesn't seem to have saved the value. > > Tom Frank > >
You can thank John Miles for that one: http://www.ko4bb.com/cgi-bin/wiki/save.cgi?StorePositionOnTrimbleThunderbolt Didier KO4BB _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
