Thanks John, I was afraid of that, what a shame they did not include a lock line on the RS-232 Port. As I said I was trying to oversimplify. There certainly is a lot of Technology in that very small box. Good luck.
Bill KD4AF On 6/20/08, John Miles <[EMAIL PROTECTED]> wrote: > > That is an RS-232 port; there's no "locked" line on it (although I agree > there should have been.) You'll need to run TBoltMon.exe to monitor its > status, or talk to Mark Sims about the dedicated Thunderbolt controller he > mentioned he was developing. > > -- john, KE5FX > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > > Behalf Of Bill Smitherman > > Sent: Friday, June 20, 2008 2:15 PM > > To: Discussion of precise time and frequency measurement > > Subject: Re: [time-nuts] FTS-4060M/S24 > > > > > > Bill [EMAIL PROTECTED] > > To the group > > Just today, received my Thunderbolt from China. It is up and > > running. Just > > a simple question > > for you you Thunderbolt Experts. After reading the Trimble Manual, > > download. I still do not have an answer. How can I tell when I have a > > lock. I desire to install an LED on one of the pins of the db9 > connector > > to indicate when lock has been achieved. I do not need to know location > > when the unit was made, GPS week and all that stuff. I am trying > > to keep it > > simple. Surely one of these pins go high when lock is achieved. I just > > need a simple indication of the lock status. Perhaps I am trying to > > oversimplify, all help appreciated. I am from the old school > > of using my > > Fluke Monotronics 207 Receivers to track the old Omega Stations and WWVB. > > Trying to get acquainted with the new GPS Technology. > > > > Thanks for any ideas. > > BillOn 6/20/08, Björn Gabrielsson <[EMAIL PROTECTED]> wrote: > > > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
