Hi Dave Rapid Electronics in Colchester do SMBs ....the eaiest way to get 200 ohms might be 2 by 100ohm in series..though it wont fit a ready made 1206 size pcb :-((
www.rapidelectronics.co.uk or www.rapidonline.com is one they quote now I think both work. I dont think you will get 74ACs there though Alan G3NYK >------snip > > I'm looking for 74ac164 and 74ac112 in SOIC (.15" wide) as the usual > > suspects (Farnell and RS Components) don't seem to stock these in UK :-( > > > > I found most of the other 74AC logic I want. > > > > I'm also hunting 200 Ohm 0.25W 1206 case thick film resistors. I can buy a > > reel of 5000 at about USD34 from RS Components, but don't really need quite > > as many as that!!! 300 ohm don't seem any easier :-( > > > > Yes, I know these aren't in the standard resistor sequence. > > > > I'll be using SMA rather than SMB connectors - they were easier to find (and > > I bought some on eBay). > > > > Cheers > > Dave Partridge > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
