Bill, I am not a quantum physicist, but my understanding of Zeeman splitting is a bit different.
With applied homogenous DC magnetic field to the atoms on their path You get splitting. Without it You have no Ramsey fringes. There is a formula to calculate mid-fringe offset from defined cesium resonance knowing splitting frequency. So You should always be able to tell the right frequency from the splitting frequency, and that has nothing to do with definition of the cesium as primary standard. The correct field strength and correct splitting frequency, by my opinion have some importance to other parameters; stability, mid fringe width etc, while resonance frequency is tied to split frequency by an exact mathematical equation. All of this under assumption that the field is homogenous. If not, than You have some other problems. Predrag Dukic At 15:48 19.7.2008, you wrote: >My understanding is that the precise cesium hyperfine transition energy, >and hence microwave frequency, is dependent upon the applied C-field, >and the field setting to select a particular transition is the same for >all clocks (which is why these are primary standards). The C-field is >set by applying an LF signal at the correct frequency to cause Zeeman >splitting, and optimizing the C-field to peak the splitting. > >So, shouldn't the Zeeman frequency always be 42.82 Khz, which is what >I've seen in every reference? But, my 5061A with a high-performance tube >has a sticker that says 'Zeeman freq 53.53 Khz'. I can indeed get Zeeman >splitting at that frequency with a C-field setting of 3.45, but is this >correct? If so, why? (BTW - I don't seem to be able to get any splitting >at 42.82 Khz) > >Confused, >Bill > >-- >Bill Ezell >---------- >They said 'Windows or better' >so I used Linux. > > >_______________________________________________ >time-nuts mailing list -- [email protected] >To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
