Two reasons - I don't have the outer can, and I don't have the
controller for the outer oven. The controller was on the Z3801 power
supply board (which is what I think these came out of, or something
very similar). I really just wanted a good tcxo with an efc input,
which the bare osc does nicely.
Bill Ezell
----------
They said 'Windows or better'
so I used Linux.
Ed Palmer wrote:
Bill,
I picked up a couple of these 'naked' oscillators. I was surprised to
hear that you stripped yours down. I'm planning to build it back up to
its former glory with a controller for the outer oven and a new cover of
some sort. Is there any reason not to do that?
Thanks,
Ed
Date: Sat, 19 Jul 2008 17:33:07 -0400
From: wje [1]<[EMAIL PROTECTED]>
Subject: Re: [time-nuts] Double ovened 10811-60158 on ebay
To: Discussion of precise time and frequency measurement
[2]<[email protected]>
Message-ID: [3]<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="ISO-8859-1"
I got one without the outer cover, which isn't quite as useful. I
removed all the junk to get down to the orginal non-double-ovened osc.
One thing I noticed - I wonder where these were actually deployed? The
10811B itself has a fair amount of corrosion on it, lots of pitting. It
still works fine, though.
Another thing, the 10811B in mine doesn't have a removable endplate,
it's soldered. This makes it a lot more difficult to adjust or repair.
Still, I think it's a fine buy for the cost. Now all I have to do is
figure out what I really want to do with it. :)
Bill Ezell
----------
They said 'Windows or better'
so I used Linux
_______________________________________________
time-nuts mailing list -- [EMAIL PROTECTED]
To unsubscribe, go to [5]https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
References
1. mailto:[EMAIL PROTECTED]
2. mailto:[email protected]
3. mailto:[EMAIL PROTECTED]
4. mailto:[email protected]
5. https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
