In this case the Stored Position will never go green since 1) the Self survey has not been configured to store the surveyed position and 2) you have not manually stored a position.
You have two choices: 1) Click on Setup, select Position..., fill in an appropriate position and click Save Segment. or 2) Click on Setup, select Self-Survey..., set the Save Position Flag to Save and click Save Segment. Then click on Control and Restart Self-Survey. The unit was shipped configured not to save position after a self-survey. This assures a Self-Survey after power cycle. Regards, Bill (NL7F) On 7/22/2008 12:49:59 PM, David Ackrill ([EMAIL PROTECTED]) wrote: > David C. Partridge wrote: > > The self survey will go green after it has completed the survey as will > the > > stored position. > > The Self Survey has gone green as Self-Survey Progress is at 100% now, > and the Thunderbolt is seeing 7 out of the 8 satellites at the moment. > However, Stored Position is still coloured yellow. > > I'll leave it monitoring over night to see what happens. > > Dave (G0DJA) > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. Bill Beam NL7F _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
