Have you tried Symmetricom tech support? Truetime is now part of Symm's Timing, Test and Measurement division.
Greg Dowd gdowd at symmetricom dot com (antispam format) Symmetricom, Inc. www.symmetricom.com "Everything should be made as simple as possible, but no simpler" Albert Einstein -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of MENSA999 Sent: Tuesday, August 05, 2008 8:31 AM To: [email protected] Subject: [time-nuts] TrueTime XL-DC Problems This is a long shot but I am hoping that someone might be able to give me some Hints as to a problem that I am having with a Used 151-601 XL-DC Receiver that I recently purchased. When I first fired it up it showed a date of 1990 so I updated the Date to the current one and then went through a 24 hour Auto Mode set up. Once the receiver went into Time mode at the end of set up. I pushed the Location button and noted A good Lat, Lon and elevation had been established. The LCD was showing 3D for the most part and 5 or 6 SAT PRN's. Looking at Osc Stats I see Offsets ranging from the 10 -10 to 10 -12, Drift 10-08 to 10-09, Phase 10-08 to 10-10 and DAC ranging very slowly from 15950 up to 16400 or so. Now the bad news after days of operation I am still showing GPS Unlocked, Position, Time Unknown (Even though a Lat, Lon had been established and UTC had been added through a Function command), Time Error and Acquisition Error ; when I do a F73 "Show Faults" . I seem to be acquirin g the satellites but not decoding their full message. I am not sure if this is due to a mistake I am making or a receiver failure. Any suggestions that anyone can give would be ever so greatly appreciated for I am at a loss and so far my web searches have been fruitless. Thank you all for your consideration in this..... Herb Belin [EMAIL PROTECTED] or 413 530 0048 _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
