Poul-Henning Kamp wrote: > In message <[EMAIL PROTECTED]>, "Ma > gnus Danielson" writes: >>> In message <[EMAIL PROTECTED]>, "Tom Van Baak" writes: >>> >>>> Is software covered by CE regulations, or just hardware? >>> Just hardware. >> Wrong. See my other notice. > > I hate to nitpick you, but there are no requirements to software > anywhere, only to the resulting products behaviour. If you do > some of the stuff with software, that's your choice. > > But there are no requirement to software as such. >
I agree, but the point is that software is included in the product and its operation and cannot be separated from it. If it is configuration, software, firmware, hardware or mechanics does not really make much difference. If it triggers a behavour which breaks whatever rules and regulation there is, the products breaks it. If you alter the behaviour, be it configuration, software, firmware, hardware or mechanics in such a way that you break the regulation the products breaks it. How the part of the product is implemented is irrelevant. So, the separation between software and hardware is meaningless. Software can be an issue. Thus, saying only hardware matters is wrong. For most cases software is not much of an issue, but it can be an issue and it can be the cause of breaking the regulations for FCC or CE marks. To cover this point, there is no requirements specific to implementation. The rules must be black box oriented. So if we invent another implementation method the rules still applies. Cheers, Magnus _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
