In a message dated 28/08/2008 18:12:45 GMT Daylight Time, [EMAIL PROTECTED] writes:
Just picked up a PTS-160 that seems to be working fine except for the front panel meter. Appears to have either an open coil or a open connection at a pivot point. No DC continuity through the meter. Anybody have a dead synthesizer that might entertain a deal on the meter? ------------------ Hi Had Sorry I can't help with the meter, even if I had one a dead PTS160 would still be much too nice to break up:-) I did look in the manual, hoping to find a meter spec for you in case something else would fit, but it seems to be one of those odd parts that isn't listed with the PCB components but not with the panel components either. I'm sure a little experimentation could find something suitable but even when working the meter isn't very precise so you could probably do just as well by marking around the level control. That's what's done on most, if not all, versions of the Wavetek 5120A which is their equivalent of the PTS160. Did you get a manual with your PTS160? regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
