In a message dated 30/08/2008 22:53:17 GMT Daylight Time, [EMAIL PROTECTED] writes:
I am playing with an Austron 1250B and I'd like to add a fine frequency adjust. The data sheet I have on the 1150 oscillator inside indicates that the EFC input is an option. Anyone have a schematic for the 1250B that shows how the 1150 is wired in. If no EFC on this unit I'll be getting rid of it. ------------------------ Hi Corby I haven't got any specific information on the 1250B but did upload the manual for the 1250 to Didier's site some time ago and it's in his GPS manuals section. As far as I know both the 1250 and 1250A came with front panel fine tuning, which uses the EFC input on the oscillator, as standard. It's shown fitted in the 1250 manual and fitted to both my 1250As. I have seen photos of the 1250B without the fine frequency pot but would suspect the 1150 would be the same in all models. The 1250 manual shows little information for the 1150 itself but the overall wiring diagram shows the fine control pot being wired to pin 8 on the 1150, as well as some other connections between the 1150 and the PSU. regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
