The dot are aligned horizontally, only a single scan line per set of dots. However, this only shows up in graph mode, not in any other display. The dots are actually in memory. If I plot the graph, they show up in the plot also.
Bill Ezell ---------- They said 'Windows or better' so I used Linux. Mark Sims wrote: > It may be related to video not being blanked properly during the vertical > retrace on the CRT... particularly if the dots on each row seem to be > regularly aligned (either vertically or most likely skewed). > > If the vertical retrace signal lasts for five horizontal scan line times, > you would see five lines of pseudo video garbage during the vertical retrace. > You might only see the video garbage if the average amplitude of the video > signal exceeded some threshold (which apparently occurs when the graph > exceeds a certain size). > > Try displaying one of those wordy help screens or a display with "bold" > values enabled and see if the problem appears there. > > ---------------------------------------- > > _________________________________________________________________ > Stay up to date on your PC, the Web, and your mobile phone with Windows Live. > http://clk.atdmt.com/MRT/go/msnnkwxp1020093185mrt/direct/01/ > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
