On Tue, 9 Sep 2008 19:19:39 +0100, "David C. Partridge" <[EMAIL PROTECTED]> wrote:
>Following the good advice I received about increasing the value of the >trimmer capacitor, I replaced the trimmer which was originally 3-12pF, with >another one which was 2-22pF. I would leave the same trimmer in there and shunt it with a fixed 10pF cap. That way the adjustment won't be so touchy. >Still don't understand why probing with a 10Meg, 1pF load kills the >oscillation stone dead until the next power cycle. That says that the circuit had just enough gain and positive feed back to oscillate but just barely. I'd have to see the circuit to recommend changes. The root cause is probably lost gain in the tube but that can be compensated for. I was just sitting here thinking about the oven problem. If you replace the thermostat with the proper power PTC thermister, you could make the oven linearly regulate at a single temperature. John -- John De Armond See my website for my current email address http://www.neon-john.com http://www.johndearmond.com <-- best little blog on the net! Tellico Plains, Occupied TN Multitasking: Reading in the bathroom! _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
