Don,

Try Googling around to see if you can find the spec for the downconverter.
We recently managed to get an old Odetics 325 working with a Meinberg
antenna/converter unit. Have emailed you the Meinberg manual off list.

Rob Kimberley 

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Don E. Wisdom
Sent: 05 October 2008 05:44
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Truetime Time server NTS-100 Downconverter
infowanted

Phil,
Its the GPS unit not the GOES
--Don





On 10/4/08 10:41 PM, "phil" <[EMAIL PROTECTED]> wrote:

Might it be possible a word of caution is in order?
Was not a "downconverter" used with the old GOES (L-band) Truetime satellite
equipment. That would not be the same as the down converters used on gps.
Just a thought.
Phil


----- Original Message -----
From: "Scott McGrath" <[EMAIL PROTECTED]>
To: "Discussion of precise time and frequency measurement"
<[email protected]>
Sent: Saturday, October 04, 2008 9:25 PM
Subject: Re: [time-nuts] Truetime Time server NTS-100 Downconverter
infowanted


> We have the time vault units - soon to be replaced with 3500's with Rb 
> Oscillators.
>
> The 'downconverter' is an amplifier used for long cable runs and the
> power injection is changed as well.    I would measure what the
> NTS-100 is actually putting out without the downconverter our 
> NTS-300/TimeVault unit puts +12 on the cable it may be much higher for
> the downconverter.    There are some TrueTime upconverters on EBAY
> right now which should do the job
>
> - Scott
>
>
>
>
> On Sat, Oct 4, 2008 at 12:17 AM, Don E. Wisdom 
> <[EMAIL PROTECTED]>
> wrote:
>> Hi All,
>> I have a NTS-100 GPS model.   I am going to be putting it into use @ my
>> employers where I have a T1 & Rooftop access & backup power.   It has the
>> lovely "downconverter required" sticker on the back of it.   It does NOT
>> like my trimble bullet antenna.   Can someone let me know how I can get
>> this
>> working with a Andrews GPS antenna?
>> Thanks
>> --Don
>>
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- [email protected] To unsubscribe, go to 
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- [email protected]
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.


_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to