Hi Mike, I ordered the shell, that was easy enough to find once I had a good part number. I wasn't sure on the coax connector so I bought one of each. I have a roll of some skinny coax which I believe is RG174, but wasn't positive. Instead of driving into work to check, I opted to just buy the other type of connector. Also, not knowing what gender, I had to buy one of each. The oscillator is still in transit and not on my desk to examine.
Thank you to all that responded. I appreciate the knowledge base and hope I can reciprocate some day. -Bob On Wed, Oct 8, 2008 at 4:42 PM, Mike S <[EMAIL PROTECTED]> wrote: > At 06:11 PM 10/8/2008, Robert Darlington wrote... > >Hello all, > > > >Would any of you happen to know where I can find a mating connector > >for the > >Efratom FRS-C rubidium standard? I see one eBay ad via a Google > >search > >listing it as a "Cannon P/N DAM11WIS", but searches on the ITT/Cannon > >website don't turn up any hits. Is this a valid part number? > > FCT makes them, and they're available from Mouser. > > Here's the catalog page: http://www.mouser.com/catalog/635/1223.pdf > > Mouser P/Ns: 152-FM11W1S-K121 (connector shell), 152-FMX006P102 (50 ohm > crimp/solder coax contact for RG-174U sized cable) > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
