Ulrich, I have been wanting to try your EZGPIB to control and capture data from various instruments I run in my lab. My GPIB bus typically has 3-6 instruments connected and I currently use the NI GPIB-ENET/100 as a LAN bridge to any one of several windows based computers. Ocassionally, I also use the NI GPIB-USB-A connected to a single instrument. In either case, I use the NI drivers and NI-488.2 ver 2.1 on WinXP. My control applications to date have been limited to Agilent VEE Pro along with the Agilent IO library suite. Can you comment on any known problems or issues I might encounter using EZGPIB with the above hardware or VISA API configuration/s. The instruments I may have on the bus are: SR620 HP 53181A HP 5372A HP 3457A HP 8903B Keithley 2002
Thanks... Don ----- Original Message ---- From: Ulrich Bangert <[EMAIL PROTECTED]> To: Time nuts <[email protected]> Sent: Friday, October 10, 2008 3:11:19 AM Subject: [time-nuts] PLOTTER & EZGPIB Gentlemen, new versions of PLOTTER and EZGPIB are available. Some bugs concerning the search for Prologix serial & network controllers have been removed and the possibility has been included to log the messages from the debug window into a file. PLOTTER now can compute the mean and the SD of a series only on the part of the series that is displayed, i.e. you can zoom in to parts of the series and compute mean & SD for the displayed part only. Enjoy Ulrich Bangert www.ulrich-bangert.de Ortholzer Weg 1 27243 Gross Ippener _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
