Hello,
Can anyone guide me or give me a link to internal settings on the Efratom
LPRO-101 Rb oscillator. I have the User's and Integration Guide but I am
looking for more detailed information on any optional settings that may be
available from the many inside jumpers and/or hidden connectors. Specifically,
all of the units I have provide a 10MHz sine wave output and I am wanting a
1PPS output on one of the units. I believe there are LPROs that provide a 1PPS
output but not sure if they are a different part number unit with different
electronics or just different jumper options inside. I scoped the hidden
connector J6 but no 1PPS signal.
There is a 9-pair J8 jumper block with 2 jumpers and a 7-pair J8 with one
jumper and a 2-pair J1 with no jumper. There is also a connector block J9 and a
3-pair J10 but they are back by the Rb lamp/cavity with analog signals on some
probably for initial test/calibration.
My units are Cage Code 55761, Part Number 102500-001
Thanks...
Don
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
