All, I'm planning doing some experiments in distance measurement. They don't deal with atomic time directly but with extreme short periods of time.
I need to determine the position of a instrument with a 1mm accuracy or less. The instrument is not connected to a mechanical device but is separate & independent. The surface which the instrument is positioned on is close to the size of a 11"x11" square. I thought of using 1 RF transmitters (not sure of freq) on bottom of the device near the surface. The surface would have RF receivers on 3 or 4 edges/corners to receive the signal. If each of the receivers positions are known and they then send a signal to a central circuit (again known positions) how can I differentiate the time of arrival at the central location? Does anybody know of a circuit/chip or system which would determine the time 'difference'. Obviously this is used to triangulate the position of the instrument. Light travels 1 mm in ~3.3 picoseconds so I would suspect the differentiator would have to have that or better resolution. It could also use some proportional method to extrapolate the position since the surface has a fixed size. Any ideas/thoughts? Thanks in advance. Rick Harold _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
