Greetings again... I guess I would like to ask Corby for the schematics of the multiplier at his convenience. I appreciate everybody's suggestions on how to dissolve the potting material of the module. I did attack it yesterday with a heat gun which actually worked pretty will. I had it clamped in a metal jawed panavise, and when you get it hot with the heat gun, the epoxy softens to the consistency of a hard rubber eraser. I then used an electricians knife to pick away at the potting. I managed to uncover the 3 caps and the remains of a diode. The diode case softened up with the potting material and all that was left was the leads and some of the innards. I left it about 1/2 uncovered. One has to be more precise at the picking away of the potting material than I was to preserve components, but at least you are not using a bunch high powered and hazardous solvents. My substitute HV PS is waiting for me at the post office, so I might be able to try that tomorrow if I get time... Thanks again, tim
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
