When I replied to this message, it bounced (apparently the address [email protected] cannot be resolved)
Didier > -----Original Message----- > From: fre_eng [mailto:[email protected]] > Sent: Monday, December 29, 2008 8:00 AM > To: [email protected] > Subject: FW: time-nuts Digest, Vol 53, Issue 112 > > Very interesting project > > what is the part number of the "base adaptor"? I searched mouser for > that term and didnt find one. > > Thanks > > Dave > > > -----Original Response----- From: Didier [mailto:[email protected]] Sent: Monday, December 29, 2008 10:30 AM To: 'fre_eng' Subject: RE: time-nuts Digest, Vol 53, Issue 112 Dave, I did not remember the link, so I googled "Silabs Base Adapter" and this came back http://parts.digikey.com/1/parts/410050-toolstick-base-adapter-toolstickba.h tml :-) If you want to program DIP chips (not Toolsticks), you also need a Debug adapter https://www.silabs.com/products/mcu/Pages/ToolStick.aspx Scroll to the bottom of the page. The Debug adapter plugs into the Base adapter and has a JTAG/C2 connector that is convenient for prototypes (10 pin header, but you only need 4 wires). Happy building! Didier _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
