No too mention other people having other mother tongue. Cheers, Ernie.
-----Original Message----- From: Magnus Danielson <[email protected]> To: Discussion of precise time and frequency measurement <[email protected]> Sent: Fri, 16 Jan 2009 10:19 am Subject: Re: [time-nuts] FTS Datum 1000A-100 David C. Partridge skrev: > I think Mark was being ironic - i.e. he agrees with you. Unfortunately, being ironic on a public email-list or forum needs to be applied with care. When a less knowing person comes in it can go terribly wrong in this case. Lack of traditional markings like :-> etc which could give a hint is also important. Within a group of peers it's not as much a problem as when others come in... Cheers, Magnus > D. > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Magnus Danielson > Sent: 16 January 2009 09:05 > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] FTS Datum 1000A-100 > > Mark Sims skrev: >> Ahhh, yes... as the Great One once said: If it jams, force it. If it > breaks, it needed fixing anyway... > > So my first attempt should be to apply 230 VAC directly, since if it fails > it needs fixing anyway... > > Sorry. Broken logic. Try again. > > This is one of the fields which that kind of reasoning DOES NOT APPLY. > Overvoltage and overcurrent is things you need to know the limits for not to > cause a mess. > > There are other things in which the logic may apply, but again, this is not > one of those. When having a component in your hand, the same kind of range > of allowed voltages etc. is not expected since it is expected that the box > that they go into will handle that as a complete design. If every component > would have huge overvoltage protection schemes they would be bulky and > overpriced. > > Besides, I have been fairly successful at opening up things and reverse them > to the level that I know what levels I can use. > > Cheers, > Magnus > >> ------ >> >>>> Or you could just connect the 24V supply and see if you get the >>>> clock out, and vice versa. This is certainly a lot easier and less >>>> destructive than taking the thing apart to find out which supply is >>>> which surely. >>>> >> _________________________________________________________________ >> Windows LiveT: Keep your life in sync. >> http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_0120 >> 09 _______________________________________________ >> time-nuts mailing list -- [email protected] To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
