on a Z3801A receiver is reset with :SYSTEM:PRESET then a one time position survey :PTIME:GPSYSTEM:POSITION:SURVEY ONCE
or your manually enter position data :PTIM:GPS:POS N,37,19,32.5,W,121,59,51.2,40.12 (thats for N 37D 19M 32.5S W 121D, 59M, 2S and 40.12 for height in meters). Also check: http://www.realhamradio.com/GPS_Frequency_Standard.htm and the forum for good info. Brian KD4FM Mitchell Janoff wrote: > I'm having a problem with my Z3816A. The health monitor and self tests show > the unit is fine, but it never moves out of the Power-up GPS acquisition > mode. I've tried several antennas (one of them currently working fine on a > z3801 unit). The z3816A shows it is tracking anywhere from 0 to 6 satellites > but never has the El or Az information filled in. Trying to initialize it > using the :GPS:INIT:POS doesn't work, I get an error message back from the > unit (or a receiver timeout msg). Is there a way to reset to the original > factory settings without using the RS232 interface, or do additional > diagnostics? > > Any assistance would be greatly appreciated. > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
