My favorite Seiko watches all have the 7T32 analog movement (quartz). It is probably the most complex quartz analog movement Seiko made. All three 7T32 watches I had repaired (by COSERV) cost me $70 or so for the movement repair, and a few more $ for replacing the crystal and crowns. Movement replacement is quite a bit more expensive, I never had to have a Seiko movement replaced. Watches with 7T32 movements cost about $350 when they were sold new, ~15-20 years ago. I bought a "new old stock" 7T32 Seiko watch last year on eBay for much less. It was (and still is) working perfectly.
Didier -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Sims Sent: Tuesday, May 12, 2009 12:06 PM To: [email protected] Subject: [time-nuts] OFF TOPIC... Seiko Digital Watch >From past experience I can tell you that the mechanisms in these watches are pretty much not repairable. If the case is solid gold and diamonds, etc it may be reasonable to have the mechanism replaced. Your best bet is to find a replacement on Ebay. My favorite Seiko/Pulsar analog/digital watches that sell for $250+ in a store can be had for less than $20 ($5 if you are patient). A watchmaker won't even take the back off for that. _________________________________________________________________ HotmailR has a new way to see what's up with your friends. http://windowslive.com/Tutorial/Hotmail/WhatsNew?ocid=TXT_TAGLM_WL_HM_Tutori al_WhatsNew1_052009 _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
