Vectron OXCO 233-5368-1 / WJ 708249-001 2.0" / 2.0" / 0.50" SMA output / mil spec, Al sheet surface mount, 4 mounting studs
E1 orange / E2 black / E3 white / E4 (case ground) Probably FSN 5955-01-144-2344 Alt part # may be V26G893 . May be 100MHZ Can possibly get several more, new. Limited test equipment here, found conflicting data on part #'s. All needed is voltages or pinouts. Sounds silly, do not want to guess. Thanks, Bill William Rice Round Rock, Texas. ---- Frequency counter needed? If you are serious need more info. Range, Resolution, Size, Accuracy, Cost etc. Just messing around or are into serious counting. I can get you a stable older HP cheap with low resolution for basic measurements cheap.. Plenty of 2ghz plastic case units out there. 5370a good. Watch out for Cheesebay 5342A's. Have had many problems with front PCB's and connect with motherboard, also bad range switch. Many are Telco units and are burned out. Almost threw one of mine off a 2 story deck. The list goes on and on. Plenty of nice used newer units out there. Good luck. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
