Hal, > The HP driver in ntpd sends an occasional ":PTIME:TCODE?\" > and expects to get > a format 2 response. I'd have to check the code to be sure > of the details.
I am going to use this command myself and will be able to tell within a few hours whether that works on a Z3805 or not. Best regards Ulrich Bangert > -----Ursprungliche Nachricht----- > Von: [email protected] > [mailto:[email protected]] Im Auftrag von Hal Murray > Gesendet: Freitag, 26. Juni 2009 10:30 > An: [email protected] > Betreff: Re: [time-nuts] Z3805 vs Z3816/Z3801 > > > >> d) Anyone know if it works with the Type 26 NTP reference > >> clock driver ? Anyone actually have it running this way ? > > > The only difference in communication against a Z3801 that I > could find > > as far comes from the 16 channel receiver: It needs more > lines in the > > status screen to list all tracked sats. So my guess is that > it should > > run with any software that does not rely TOO strong on positions on > > the status screen. > > The HP driver in ntpd sends an occasional ":PTIME:TCODE?\" > and expects to get > a format 2 response. I'd have to check the code to be sure > of the details. > > There is an option that I'm not familiar with to log the > status screen. It > expects 24x80 characters. If something similar to a Z3801 > has a different > size screen we should be able to work out something.... > That's assuming it > works without logging the status screen. > > > -- > These are my opinions, not necessarily my employer's. I hate spam. > > > > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
