That doesn't look like a GPIB interface bug to me. Those usually involve duplicating or dropping data rather than arbitrarily turning multiple ASCII digits into others. Given the nature of those outliers I'd suspect a problem with the calculations made by the counter itself.
Although: the later GPIB-USB and GPIB-LAN firmware is a pretty important update for some instruments, due to a change made in the way the bus pullups are used. If you are using either of these adapters, you should make sure you have the latest update installed. -- john, KE5FX > Hi > > I've had the same thing happening with a Prologix Ethernet setup until > firmware 1.5.1.0. > -Henry > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Hal Murray > Sent: Wednesday, July 08, 2009 7:17 PM > To: [email protected] > Subject: [time-nuts] Glitches in data > > I've got an HP 5334B collecting data via a Prologix USB setup. It's > been > running for months. > > Mostly, it's doing what I expect. But then I got 2 glitches in the last > two > days. > > Here is a graph: > http://www.megapathdsl.net/~hmurray/time-nuts/Drift-ocxo3mhz-d.gif > > Here is the raw data: > > It's the 2.999... column. The second column is seconds in the day day. > They > are 5 minutes apart. > > 55019 65824.624 F +2.9999996881E+06 F +3.2768070130E+04 > 55019 66124.710 F +2.9999996881E+06 F +3.2768070725E+04 > 55019 66424.796 F +2.9999996880E+06 F +3.2768071164E+04 > 55019 66724.882 F +2.9999997045E+06 F +3.2768071592E+04 <== > 55019 67024.968 F +2.9999996878E+06 F +3.2768072178E+04 > 55019 67325.054 F +2.9999996878E+06 F +3.2768072586E+04 > 55019 67624.140 F +2.9999996880E+06 F +3.2768073011E+04 > 55019 67924.226 F +2.9999996881E+06 F +3.2768073466E+04 > > 55020 61924.265 F +2.9999996883E+06 F +3.2768068930E+04 > 55020 62224.351 F +2.9999996884E+06 F +3.2768069393E+04 > 55020 62524.437 F +2.9999996882E+06 F +3.2768069919E+04 > 55020 62824.523 F +2.9999997030E+06 F +3.2768070314E+04 <== > 55020 63124.609 F +2.9999996885E+06 F +3.2768070508E+04 > 55020 63424.695 F +2.9999996885E+06 F +3.2768070907E+04 > 55020 63724.781 F +2.9999996878E+06 F +3.2768071254E+04 > 55020 64024.867 F +2.9999996879E+06 F +3.2768071523E+04 > > > Does anybody have any suggestions for what is causing things like this? > Or a > checklist of things I should consider? > > Everything is plugged into the same outlet. The OCXO is powered by a > wall > wart. > > I wasn't near it at either time. > > My UPS didn't see any power glitches at either time. (They are not > running > off the UPS. For this, I'm just using it to monitor power.) > > > > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
