Hi, This is the same as the palisade connector. Search the list for pallisade and or g8rpi for an earlier answer.
Robert G8RPI. --- On Tue, 14/7/09, Skip Withrow <[email protected]> wrote: > From: Skip Withrow <[email protected]> > Subject: [time-nuts] Source for Trimble Acutime 2000 Connectors? > To: [email protected] > Date: Tuesday, 14 July, 2009, 4:09 AM > > Hello Time-nuts, > I'm looking for the connector to mate with a Trimble > Acutime 2000. The connector part number is Deutch MMP > 26C-2212S1, pins are 6862-201-22278, and back shell is > 6810-204-2001. > I've tried the usual - Mouser, Digi-Key, and Newark. > Who is their distributor in the US? > I would even take a used connector cut-off (or not cut off > the cable even) if someone had one laying around the shop. > Any help appreciated. > Regards, > Skip Withrow > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
