I use a 2x5 IDC cable with a connector like this: http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=CSC10G-ND
For testing, the cable I use comes from a PC. It has this connector on one end and a DB-9 connector (for a serial port) on the other end. I do this because solder-type DB-9 connectors are easy to work with. If you build the LPRO into a piece of equipment, use a cable with the above connector on both ends and put a 2x5 array of pins on your circuit board.
Ed Richard W. Solomon wrote:
How do folks like to connect to this RbO ? Do they use a connector ? Or just solder to the pins ? If they use a Connector can you tell me the Make & Part Number ? Thanks, Dick, W1KSZ _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
_______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
