Mark, Did you save the eprom segment after setting after changing the number of survey points. Mine (rev 3.0) knows it was told 10000 survey points.
PS Still waiting for your reply about the SG504 levelling head kits. Cheers Dave -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Sims Sent: 16 July 2009 18:39 To: [email protected] Subject: [time-nuts] Accurate Thunderbolt position More adventures in the subtle wonders of Thunderbolt firmware... My idea to get a Thunderbolt to accept a high precision fixed position by putting it into 3D fix mode, waiting for it to generate a fix sufficiently close to the desired location, and then putting it into position hold mode... is a bust. Position hold mode reverts to the last saved/surveyed position. Ok, so let's try doing single fix surveys until one comes close to the desired position... no joy. The Tbolt documentation says that you can do surveys from 1 to 2**32-1 fixes... nope. Firmware rev 2.22 only seems to do 1400 point surveys. Rev 3.0 only does 2000 point surveys. The units seem to ignore the fix count parameter in the "set survey parameters" command. Does anybody know how to set the self-survey fix count value? ---------------------------------------- _________________________________________________________________ Windows LiveT: Keep your life in sync. http://windowslive.com/explore?ocid=TXT_TAGLM_WL_BR_life_in_synch_062009 _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
