In a message dated 03/08/2009 10:39:55 GMT Daylight Time, [email protected] writes:
Manuals for other PTS units posted by GandalfG8 <Nigel> on Didier's pages got me started -- thank's guys. The D310 should be able to generate frequencies to 0.1 Hz resolution. I haven't figure out how to set it beyond 1 Hz resolution. The 'F' command sets the frequency. I assumed I would just give it one extra digit for the extra resolution, but that doesn't seem to work. --------------- Hi Rex Glad to hear the manual was helpful:-) I'm not familiar with the D310, aware of it but never seen one, but the basic PTS310 is only specified to 1Hz resolution so would have expected the D310 to probably be the same. The PTS310 is the only one of the lower frequency units, ie below 1GHz, that doesn't have 0.1 Hz as an option but it's also the only one that offers it's finest resolution by default. Whereas the other units use a series of identical optional plug ins to provide the 10KHz to 0.1Hz steps, the PTS310 uses a digital synthesis module for the finer resolutions so always goes to 1Hz but doesn't, as far as I'm aware, have any option to extend beyond that. regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
