Hi Jim, YES, please email me the schematics.
thank you Bill....WB6BNQ [email protected] Jim Palfreyman wrote: > OK folks, I've rechecked the voltages and here's the details. > > Firstly, changing the oven temperature screw was a mistake. Read a > previous thread to see why I did it. It was logical given my > experience with 10811 ovens. I've owned up to it and begged > forgiveness from the great Flying Spaghetti Monster. It never answered > so it must have made me do it. Please drop that now. :-) > > When I first powered the unit up it had bad and leaking NiCd batteries > and made a horrible sound. I removed those and I presume something was > damaged. > > The "input" voltage to the 2N1701 is normal (according to the front > panel meter) and is close to 26V. The "output" voltage is 25V and not > 18V as the manual says. I have the manual now and anyone (with more > experience than me on old fashioned power supplies) who wants to > comment I am happy to email the circuit diagram and eagerly await > comment!!! > > Jim > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
