A couple weeks ago (check the archives around 26 July 2009)  I posted some 
plots of the PPS/OSC error estimates when the receiver's position was 
intentionally offset from its true position.  The results were rather 
dramatic...  And the quality of the data scaled with the position error.  It 
certainly looks like a the more precise your position is known,  the better 
will be your performance...  it certainly cannot hurt.  And for some strange 
reason we tend to be a bit obsessive nut cases about such things...

There are several faults in the standard Tbolt survey mechanism.  There are +/- 
20 foot changes in the averages of fixes over a 1 hour time interval (a typical 
self-survey time).   Depending upon the luck of the draw,  you never know if 
you will get a good survey position.

An ideal survey should occur over 24 hour intervals.  This will mitigate both 
environmental (atmospheric) and orbital (multipath) effects.  Just specifying a 
86,400 point survey has problems.  There will be times when the PDOP is too 
high for the survey fixes to be usable,  so  it usually takes several more 
hours to complete.  This will introduce biases into the results.

Also,  simple averages are far from ideal even with perfect 24 hour survey 
intervals.  I am using weighted medians over 1 minute, 1 hour,  and 24 hour 
intervals.  I am routinely seeing results under 1 foot lat/lon,  2 foot 
altitude.  A simple average of the fixes over 24 hours is typically three to 
five times that.  

The quality of the results match the quality of the antenna.  A geodetic/survey 
grade antenna gives results to within a few inches.  A conical timing antenna 
within 8 inches.  A cheap patch antenna around a foot.


----------------------------------------


_________________________________________________________________
Get back to school stuff for them and cashback for you.
http://www.bing.com/cashback?form=MSHYCB&publ=WLHMTAG&crea=TEXT_MSHYCB_BackToSchool_Cashback_BTSCashback_1x1
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to