This may be a bit half-off topic, so please reply to the direct e- mail address if it is.
I am having a foray into the world of Spectracom NTP servers. Mmy particular starting point was a bare-bones model 9183. Previously I was faithful to Odetics and the little stratum 1 from them, that I am now using now, cannot be faulted. My questions are: Does anyone know which particular Rubidium freq. standard the 9183 uses or a direct plug-in (without gnashing of teeth) equivalent? I assume it uses a Rubidium source with 10 MHz sine output and not TTL, please oh please correct me if I am wrong. Are there any schematics for the 9183? If I were to also use a xtal in combination with the Rubidium source (can I?), which OCXO would/should I use? Is the xtal 10 MHz sine or TTL? Can anyone name any manufacturers of acceptable xtals for this device? Rubidium sources are relatively inexpensive and abundant, so I should not have a problem finding the correct type if I do not have one already. Cheers, Christopher _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
