I have the one for serial prefix 1908A - this may be the same as Didier's. If not, and you want it, email me and I'll send it to you.
Regards, Jim Palfreyman 2009/8/16 Brian Kirby <[email protected]>: > Mine is the 10811-60109.....serial number prefix is 2432..... > > Bought the unit at The Huntsville Hamfest today. I knew the test equipment > dealer and he let me take the unit home to check it and so far it appears to > be OK. I had to adjust the coarse frequency before I closed the loop, as it > had high error voltage. I let it warm up about 30 minutes, and then > adjusted it against a GPSDO, closed the loop, reset the logic and I have > continuous operation light and all the meter readings are close to the > recorded values. After an hour, I did a quick drift test and I have > 8x10E-12 in 2 minutes. Its 20 years old according to the recorded meter > readings. > > Its just a rubidium oscillator. No digital clock or 1 PPS circuits. Looks > like I get to go back and pay the man. I love hamfest ! > > Bruce - I found the manual at Didier's site, but its not for the one I have > - but its a good place to start. I looked there before, But I must have > been too quick. Thanks. > > > Brian Kirby KD4FM > > Dan Rae wrote: >> >> Brian Kirby wrote: >>> >>> Anybody know where I can find a PDF of the HP 5065A rubidium frequency >>> standard ? >> >> Brian, assuming you mean the manual, Artek Media have one for sale, but it >> is for the older versions. I have never been able to find one for the later >> versions that use the 10811 OCXO. >> >> Dan >> >> >> _______________________________________________ >> time-nuts mailing list -- [email protected] >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
