On 8/14/09 9:13 AM, "Mark Sims" <[email protected]> wrote: > > > Some of the data collection runs that I want to do is with the patch mounted > on a pizza pan and in a cake pan and see if that helps the performance by > faking what a survey antenna does. > If you can scrounge up some suitable RF absorbing material to put on the pan, that might be an interesting experiment. Maybe even something like charcoal briquettes (I don't know if the resistivity is right..) I've tried the pizza pan thing, but that was because my antenna was a magmount, and it was convenient. I didn't see if it gave better performance. A flat plate might actually be worse than putting the bare antenna up on a pole, because it gives strong multipath from a very close reflection point. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
- Re: [time-nuts] Difference in ... Chuck Harris
- Re: [time-nuts] Difference in ... Lux, Jim (337C)
- Re: [time-nuts] Difference in ... David I. Emery
- Re: [time-nuts] Difference in ... Magnus Danielson
- Re: [time-nuts] Difference in ... d . seiter
- Re: [time-nuts] Difference in GPS antennas WB6BNQ
- Re: [time-nuts] Difference in GPS anten... Hal Murray
- Re: [time-nuts] Difference in GPS antennas David I. Emery
- Re: [time-nuts] Difference in GPS antennas J. Forster
- [time-nuts] Difference in GPS antennas Mark Sims
- Re: [time-nuts] Difference in GPS antennas Lux, Jim (337C)
- Re: [time-nuts] Difference in GPS antennas Pete Lancashire
- Re: [time-nuts] Difference in GPS antennas Lux, Jim (337C)
- Re: [time-nuts] Difference in GPS antennas Robert Darlington
- Re: [time-nuts] Difference in GPS anten... Joseph M Gwinn
- Re: [time-nuts] Difference in GPS ... Magnus Danielson
- [time-nuts] HP 5065A Rubidium Brian Kirby
- Re: [time-nuts] HP 5065A Rubid... Dan Rae
- Re: [time-nuts] HP 5065A Rubid... Brian Kirby
- Re: [time-nuts] HP 5065A Rubid... Jim Palfreyman
- Re: [time-nuts] HP 5065A Rubid... Brian Kirby
