You need to replace the internal battery (3.6) and calibrate the inputs; the procedure is simple.
-----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]on Behalf Of Norman J McSweyn Sent: Friday, September 04, 2009 8:16 AM To: Discussion of precise time and frequency measurement Subject: [time-nuts] HP 5372a error 160 Hi all!! Bid on and got an HP 5372a. Supposed to be tested, working. Powers up to error 160 out of sensitivity calibration. Did download the svc man from Agilent. Spent a few minutes looking through the manual. Not sure what to make of it. It's not obvious whether a complete cal needs to be done. Questions, comments cheerfully received. Will be on a boat trip for our holiday (US) from 10z Saturday until Tuesday 10z or so. Thanks, Norm n3ykf _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.