I have not tried setting parameters in Lady Heather, but the Trimble
Thunderbolt Monitor program has a field for this. Its under SETUP then
TIMING OUTPUTs. The first variable is PPS Offset. In my case its 128
ns, its entered as -1.280e-07.
Brian KD4FM
Gordon Batey wrote:
Greetings to all timekeepers,
I have been reading the list for some time now and have greatly benefited
from the threads.
I have been fortunate to get one of the latest TAPR Thunderbolts (thankyou
tvb and TAPR). I also have built the TAPR distribution kit and it seems to
be a great item also.
I have the TBOLTMON and LadyHeather. LH is surely a work of art in my humble
opinion. Great program.
My question is related to the length of antenna cable. I measured it before
installation and ran some rudimentary tests but have not been able to enter
the cable delay anywhere. It is most likely in a perfectly logical location
in one or both of these programs but I cannot seem to find it.
Any suggestions would be appreciated.
Thanks in advance,
Gordon Batey
[email protected]
or
[email protected]
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
