John, Thought I would ride alond on this email thread and ask about my TAPR TADD-1, Enclosure and TB order from back in June. At that time, shipping was targeted for Sept.
Order under Don Johnson, True-Cal Regards... Don ________________________________ From: John Ackermann <[email protected]> To: Discussion of precise time and frequency measurement <[email protected]> Sent: Thursday, September 17, 2009 6:34:16 PM Subject: Re: [time-nuts] TADD-1 Documentation Error Thanks! That's the first time that's been noted in the years since the docs were written. :-) John ---- Brian Kirby said the following on 09/17/2009 05:31 PM: > John - N8UR > > On page 13; titled Initial Test -- 2; there is a documentation error in the > middle section; Integrated Circuit Installation -- 2. > > "Install a MAX477 IC at IC2, IC2, IC3, IC4, IC5, IC6, IC7" > > Should start with IC1..... > > Brian - KD4FM > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
